Labs RTA 22 mm BP Mods
€72.90
No tax
Delivery in 3 /4 days
Here is the LABS, the new ultra-complete rebuildable MTL atomizer by BP Mods! Multiple customization options for your vaporizer.
4 domes to change depending on the liquid you want to vape. 6 airflow inserts for a very precise vape.
- Single coil decks
- Capacity of 2.7ml
- Liquid flow control
Labs RTA 22mm BP Mods
The Labs RTA by BP Mods is a 22mm diameter rebuildable atomizer made by BP Mods in collaboration with the Guancia Vape team (designed by Alen Tufekcic) and designed to offer a broad spectrum MTL experience.
The device is in fact equipped with 4 different bells that modify the aromatic yield of the steam and which can be replaced with a special tool included in the package, as well as 6 different air-pins under the coil with fixed airiness (double hole 0.8 - 0 ,8 – 1.0 – 1.1 – 1.2 – 1.5mm). The air flow starts from the side slots and hits the heating element from below.
Each bell has a different internal shape and is designed for a specific category of e-liquid:
Bell with 3 low and squared steps: clean and dry aromatic yield, suitable for tobaccos
Bell with double high and rounded vault: rich and moist aromatic yield, ideal for creamy
Bell with double high and squared step: aromatic yield of medium humidity, excellent for fruity and creamy
Bell with double rounded vault and lateral cavities: decomposed aromatic yield, which highlights the individual ingredients, ideal for tobacco mixtures and spicy liquids
The atomizer is made of stainless steel and has a frosted polycarbonate tank with a capacity of 2.7ml, which feeds the resistance through a top-down liquid dripping system. The single coil deck is equipped with two recesses on which to place the jigger, so as to facilitate regeneration operations, and cross screws: accessed by "uncorking" the atomizer.
It mounts an interchangeable 510 drip tip and, thanks to the 510 connector, can be installed on any box mod or tube that has the same connection.
Elegant, austere and super eclectic: a cheek atomizer with great character and personality that stands out from the crowd.
Available in DLC or Stainless Steel version.
Instructions for Use
Regenerate the deck with the coil you prefer, insert some cotton inside and lay the edges in the vats for the liquid
Wet the cotton with the desired liquid
Regenerate the deck with the coil you prefer, insert some cotton inside and lay the edges in the vats for the liquid
Fill the tank from below
Install the bell of your choice under the tank, turn it upside down and install it on the deck
vaping
Features
Diameter: 22mm
Vape type: cheek
Liquid capacity: 2.7ml
Refilling liquid: from below
Air regulation: under-coil air pin
Box contents
Labs RTA
6 x Air pins (double hole 0.8 – 0.8 – 1.0 – 1.1 – 1.2 – 1.5mm)
4 x different bells
1 x Bell Removal Tool
1 x Bag with o-ring and spare screws
1 x Instructions for use
Labs RTA 22
1 Item
Data sheet
- Typology
- Rebuildable Atomizer
- Material
- Steel
- Diameter
- 22mm
- Original product
- Yes
- Deck coil
- Single coil
- Tank capacity
- 2,7 ml
Shipment
Orders are shipped the same working day if the purchase is made before 14:00 and only if the payment is confirmed by our bank.
Due to problems or above-average number of orders, shipping may differ to the next day.
Shipping costs include handling and packaging costs, insurance costs, sending courier emails, courier sms and calling the courier in case of absence.
Order canceled by Svaposervizi.net
Svaposervizi.net reserves the right to cancel any order at any time if a technical or administrative error is found.
The buyer will be notified with the reasons and the refund on the payment method used.
Shipping costs are free for purchases over € 60, only for Italy.
Times and Costs Italy
ITALY
Shipping costs € 5,90 with a cost of less than € 60. With a cost of more than € 60, shipping is free.
SARDINIA
There is no free shipping in this area. The cost of shipping will be calculated in the cart after entering the shipping data.
TIMES AND COSTS EUROPE
The cost of shipping in Europe varies from € 16 to € 25 depending on the country and there are courier costs.
The cost will be calculated in the cart during checkout, after entering the shipping data.
Note
All shipping costs indicated refer to non-disadvantaged locations, particular islands and / or difficult-to-service countries. Therefore the shipping cost may vary depending on the destination.
Countries served
The following countries are served by our services.
Albania
Austria
Belgium
Bulgaria
Croatia
Czech Republic
Denmark
France
Germany
Greece
Italy
Luxembourg
Holland
Poland
Romania
Slovenia
Spain
Hungary
Delivery time
ITALY = C24 / 48 / 72h.
EUROPE - 48 / 96h.
Orders are processed daily but are shipped Monday to Friday as express couriers do not work on weekends.
Orders placed on Saturday and Sunday will be entrusted to the courier on the following Monday.
All orders received by 2:30 pm each day will be processed on the same day.
Delayed shipments on holidays or strikes
Attention, an international shipment can be delayed due to national holidays or strikes. Situations we do not know.
WITHDRAWALS AND DELAYS OR NON-DELIVERY VALID FOR ITALY ONLY
Always indicate your phone number, to avoid problems.
The courier will carry out the proof of delivery twice for two days, and is obliged to call in case of absence of the customer.
In case of non-collection / presence, the package will be available at the nearest depot for 14 days.
In the event of a request for redelivery, the courier will charge the customer € 11.00 for the following additional costs:
€ 6.00 return
€ 15.00 beginning and closing of the practice.
In case of non-collection it is advisable to contact the local office (GLS Italia), to arrange the collection and any costs to be borne by you.
In the event that the goods return to our company due to absence, non-collection extended beyond the deadline, and / or without reason, the amount due to the courier will be withheld from your payment. If the credit is insufficient, a refund will be requested in our favor. Initially by debit and in the negative case through the offices in charge.
CUSTOMS RATE, EXTRA EU VAT
The import tax, duty and VAT are to be paid by the customer.
Payment methods accepted
- Credit, debit, PostePay, prepaid, rechargeable cards
All payments are made securely through Nexi circuits.
- Bank Transfer
The goods are processed only after being credited to the current account (2/3 days).
- Cash on delivery
Payment method is not accepted.
For more information see: Secure payments
4 other products in the same category:
chat
Comments (0)
WHY SVAPOSERVIZI?
Svaposervizi is an Italian site and a physical store dedicated to the electronic cigarette and the world of vape.
All the proposed products are first tested by us (hardware, liquids and aromas), and then if deemed valid recommended to our customers. Atomizers, complete kits, Box mods, flavors, decomposed bases and liquids from the best brands.
Svaposervizi has become a point of reference in Liguria, thanks to the vast catalog, the offers and the passion that we all put into it. If you want to know more and want advice or even just information, you can contact us or consult our blog, and our guides.
NEW PRODUCTS WEEKLY
Every week we offer new products, offers and promotions. In some months of the year, however, you will find absolute goodies, coming from the most important international vaping fairs.
In October we will be in Rome and Paris, to discover all the latest news on the market!
Service Countries
Albania, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Germany, Greece, Hungary, Luxemburg, Netherlands, Poland, Romania, Slovenia, Spain.
Here is the LABS, the new ultra-complete rebuildable MTL atomizer by BP Mods! Multiple customization options for your vaporizer.
4 domes to change depending on the liquid you want to vape. 6 airflow inserts for a very precise vape.
- Single coil decks
- Capacity of 2.7ml
- Liquid flow control